10.1 GEARCALC/ page 1
  10.1.1 Description
  10.1.2 Normal pressure angle
  10.1.3 Helix type
  10.1.4 Helix angle
  10.1.5 Required ratio
  10.1.6 Profile modification
  10.1.7 Stress cycle factor
  10.1.8 Calculation of tooth form factor
  10.1.9 Reliability and The Reliability Factor
  10.1.10 Required safety factors
 10.2 GEARCALC/ page 2
  10.2.1 Material selection
  10.2.2 Quality according to AGMA 2000/AGMA 2015
  10.2.3 Finishing method
 10.3 GEARCALC/ page 3
  10.3.1 Transmitted power
  10.3.2 Pinion speed
  10.3.3 Required Design life
  10.3.4 Overload factor
  10.3.5 Load distribution factor
  10.3.6 Dynamic factor
  10.3.7 Driving
  10.3.8 Reversed bending
  10.3.9 Number of contacts per revolution
 10.4 GEARCALC/ page 4
  10.4.1 Center distance
  10.4.2 Pitch diameter pinion
  10.4.3 Net face width
  10.4.4 Normal diametral pitch
  10.4.5 Normal module
 10.5 GEARCALC/ page 5
  10.5.1 Result overview
 10.6 GEARCALC/ page 6
  10.6.1 Proposals for profile shift factors
  10.6.2 Enter pinion profile shift factor